|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HT9291/HT9292/HT9294 TinyPowerTM Operation Amplifier Features * Wide operating voltage: 1.4V to 5.5V * Low quiescent current: typical 0.6mA/amplifier * Rail-to-Rail output * Gain bandwidth: 11kHz typical * Unity gain stable * Available in Single, Dual and Quad OPs package types * Package type: HT9291: TSOT23-5 HT9292: 8-pin DIP/SOP HT9294: 14-pin DIP/SOP Applications * Wearable products * Temperature measurement * Battery powered products * Portable equipment * Low power sensors General Description The Holtek HT9291/HT9292/HT9294 range of Low Power Operation Amplifiers offer the advantage of a single supply voltage down to as low as 1.4V as well as the advantages of an extremely low quiescent current of only 0.6mA/amplifier. One other major advantage of these devices lie in their rail-to-rail voltage operation for maximum range. The devices also provide a typical gain bandwidth product of 11kHz and are also unity gain stable. The devices are available in a range of packages according the number of internal amplifiers. The special characteristics of these devices will ensure their excellent use in applications with stringent low power demands such as portable products, battery powered equipment, low power sensor signal processing etc. Selection Table Part No. HT9291 HT9292 HT9294 Amplifiers 1 2 4 Package TSOT23-5 8DIP/SOP 14DIP/SOP Block Diagram 1O U T 1 IN 1 IN + VDD 2 IN + 2 IN 2O U T 4O U T 4 IN 4 IN + VSS 3 IN + 3 IN 3O U T Rev. 1.00 1 March 8, 2010 HT9291/HT9292/HT9294 Pin Assignment VDD IN 1O UT 1 2 3 4 5 6 7 8 1 IN 1 IN + 1O UT 1 8 2 7 3 6 4 5 1 IN 1 IN + OUT VSS IN + VSS H T9291 T S O T 2 3 -5 VDD 2O UT 2 IN 2 IN + VDD 2 IN + 2 IN 2O UT 14 13 12 11 10 9 4O UT 4 IN 4 IN + VSS 3 IN + 3 IN 3O UT H T9292 8 D IP -A /S O P -A H T9294 1 4 D IP -A /S O P -A Pin Descriptions HT9291 Pin No. 1 2 3 4 5 HT9292 Pin No. 1 2 3 4 5 6 7 8 HT9294 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin Name 1OUT 1IN1IN+ VDD 2IN+ 2IN2OUT 3OUT 3IN3IN+ VSS 4IN+ 4IN4OUT Analog output (operation amplifier 1) Inverting input (operation amplifier 1) Non-inverting input (operation amplifier 1) Positive power supply Non-inverting input (operation amplifier 2) Inverting input (operation amplifier 2) Analog output (operation amplifier 2) Analog output (operation amplifier 3) Inverting input (operation amplifier 3) Non-inverting input (operation amplifier 3) Negative power supply Non-inverting input (operation amplifier 4) Inverting input (operation amplifier 4) Analog output (operation amplifier 4) Description Pin Name 1OUT 1IN1IN+ VSS 2IN+ 2IN2OUT VDD Analog output (operation amplifier 1) Inverting input (operation amplifier 1) Non-inverting input (operation amplifier 1) Negative power supply Non-inverting input (operation amplifier 2) Inverting input (operation amplifier 2) Analog output (operation amplifier 2) Positive power supply Description Pin Name OUT VSS IN+ INVDD Analog output Negative power supply Non-inverting input Inverting input Positive power supply Description Rev. 1.00 2 March 8, 2010 HT9291/HT9292/HT9294 Absolute Maximum Ratings Supply Voltage .......................................................6.0V Difference Input Voltage ..............................(VDD-VSS) Storage Temperature .........................-65C to +150C Junction Temperature ..........................................150C Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Input Voltage..............................VSS-0.3V ~ VDD+0.3V ESD protection on all pins (HBM;MM) ........4kV; 400V Operating Temperature ........................-40C to +85C Electrical Characteristics Unless otherwise indicated, VSS=GND, Ta=25C, VCM=VDD/2, VL=VDD/2, and RL=1MW to VL, CL=60pF Symbol VDD VOS DVOS/DT IOS IB VCM Parameter Supply Voltage Input Offset Voltage Drift with Temperature Input Offset Current Input Bias Current Input Common Mode Range Test Conditions VDD 3/4 5V 5V 5V 5V 5V 3/4 VIN=VCM/2 VIN=VCM/2 Ta=25C Ta=25C 3/4 0.5V input overdrive RL=1MW to VL 0.5V input overdrive RL=50kW to VL DC Open-Loop Gain (large signal) Gain BandWidth Product Phase Margin Common Mode Rejection Ratio Power Supply Rejection Ratio Supply Current Per Single Amplifier Slew Rate at Unity Gain Output Short Circuit Source Current Output Short Circuit Sink Current 5V 5V 5V 5V 5V 5V 5V 5V 5V VOUT=0.2V to VDD-0.2V, VIN=VCM/2 RL=1MW, CL=60pF VIN=VCM/2 RL=1MW, CL=60pF G=+1V/V, VIN+= VDD/2 VCM=0V to VDD-1.4V VCM = 0.2V Io=0A RL=1MW, CL=60pF VIN+ - VIN- 10mV VIN- - VIN+ 10mV Conditions Min. 1.4 -5.0 3/4 3/4 3/4 0 VSS+10 VSS+20 70 3/4 3/4 60 65 0.3 3/4 -0.3 1 Typ. 3/4 3/4 2 5 50 3/4 3/4 3/4 100 11 50 90 95 0.6 5 -1.2 4 Max. 5.5 5.0 3/4 3/4 3/4 VDD-1.2 VDD-10 VDD-50 3/4 3/4 3/4 3/4 3/4 1.0 3/4 3/4 3/4 Unit V mV mV/C pA pA V mV mV dB kHz dB dB mA V/ms mA mA VOH VOL Maximum Output Voltage Swing 5V AOL GBW Fm CMRR PSRR ICC SR IO_SOURCE IO_SINK Rev. 1.00 3 March 8, 2010 HT9291/HT9292/HT9294 Functional Description Input Stage The input stage of op amps are nominal PMOS differential amplifiers (see the following diagram), therefore the common mode input voltage can extend to VSS-0.6V. On the other hand the common mode input voltage has to be maintained below (VDD-1.2V) to keep the input device (M2 and M3) active. This implies that when using HT9291/HT9292/HT9294 as a voltage follower, the input as well as output active range will be limited between VSS~VDD-1V (approx.). Avoid applying any voltage greater than VDD+0.6V or less than VSS-0.6V to the input pins, otherwise the internal input protection devices may be damaged. V V M1 N o n in v e r tin g In In v e r tin g In M2 PMOS M3 PMOS DD Output Stage The HT9291/HT9292/HT9294 uses push-pull CMOS configuration as the output stage of op amps to minimize low power consumption and to provide adequate output driving current. Note that the output is an unbuffered structure, therefore the open loop gain will be affected by the load resistor since the voltage gain of this stage can be expressed as (gm5+ gm6)RL. V DD V B IA S B IA S M5 OUT F ro m D iffe r e n tia l Amp M6 V T o O u tp u t S ta g e SS V M4 SS M5 V SS Since the input impedance of PMOS is inherently very high, it can directly couple to high impedance elements without loading effect. For example, coupling to ceramic transducers, integrating capacitor and resistor networks. Actually the extremly high input impedance is its major advantage over the bipolar counterpart, in some application fields such as integrators where the input current of op amp can cause significant error. Because of the consideration for minimized power consumption, the output short circuit current is limited to about -1.2mA for source drive and 4mA for sink drive. This is believed to be enough for most low power systems, however it is recommended to use the load resistor of >1MW for normal applications. In case of heavy load driving, an external buffer stage using bipolar transistors is recommended. The HT9291/HT9292/HT9294 is internally compensated for AC stability and capable to withstand up to a 60pF capacitive load. Rev. 1.00 4 March 8, 2010 HT9291/HT9292/HT9294 Application Circuits High Side Battery Current Sensor V I IN V 10kW V IN OUT DD 100kW 1M W I IN = V D D -V O U T (1 1 V /V ) x (1 0 k W ) Two Op Amp Instrumentation Amplifier R G V REF R 1 R 2 R 2 R 1 V OUT V 1 V2 1 /2 H T9294 V OUT 1 /2 H T9294 1 = (V 2 -V ) x (1 + R R 1 2 + 2R R G 1 )+ V REF Rev. 1.00 5 March 8, 2010 HT9291/HT9292/HT9294 Package Information 5-pin TSOT23-5 Outline Dimensions * MO-193C Symbol A A1 A2 b C D E E1 e e1 L L1 q Symbol A A1 A2 b C D E E1 e e1 L L1 q Dimensions in inch Min. 3/4 0.000 0.028 0.012 0.003 3/4 3/4 3/4 0.012 3/4 0 Nom. 3/4 3/4 3/4 3/4 3/4 0.114 0.110 0.063 0.037 0.075 3/4 0.024 3/4 Dimensions in mm Min. 3/4 0.00 0.70 0.30 0.08 3/4 3/4 3/4 3/4 0.30 3/4 0 Nom. 3/4 3/4 3/4 3/4 3/4 2.90 2.80 1.60 0.95 1.90 3/4 0.60 3/4 0.60 3/4 8 3/4 Max. 1.10 0.10 1.00 0.50 0.20 3/4 3/4 0.024 3/4 8 3/4 Max. 0.043 0.004 0.039 0.020 0.008 3/4 3/4 Rev. 1.00 6 March 8, 2010 HT9291/HT9292/HT9294 8-pin DIP (300mil) Outline Dimensions A B 1 4 8 5 H C D E F G I Symbol A B C D E F G H I Symbol A B C D E F G H I Dimensions in inch Min. 0.355 0.240 0.125 0.125 0.016 0.050 3/4 0.295 3/4 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 0.100 3/4 0.375 Dimensions in mm Min. 9.02 6.10 3.18 3.18 0.41 1.27 3/4 7.49 3/4 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 2.54 3/4 9.53 Max. 9.53 6.60 3.43 3.68 0.51 1.78 3/4 8.00 3/4 Max. 0.375 0.260 0.135 0.145 0.020 0.070 3/4 0.315 3/4 Rev. 1.00 7 March 8, 2010 HT9291/HT9292/HT9294 14-pin DIP (300mil) Outline Dimensions A 14 8 7 B 1 H C D E F G I Symbol A B C D E F G H I Symbol A B C D E F G H I Dimensions in inch Min. 0.745 0.240 0.125 0.125 0.016 0.050 3/4 0.295 3/4 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 0.1100 3/4 0.375 Dimensions in mm Min. 18.92 6.10 3.18 3.18 0.41 1.27 3/4 7.49 3/4 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 2.54 3/4 9.53 Max. 19.69 6.60 3.43 3.68 0.51 1.78 3/4 8.00 3/4 Max. 0.775 0.260 0.135 0.145 0.020 0.070 3/4 0.315 3/4 Rev. 1.00 8 March 8, 2010 HT9291/HT9292/HT9294 8-pin SOP (150mil) Outline Dimensions A 1 8 5 B 4 C C' G D E F H a * MS-012 Symbol A B C C D E F G H a Symbol A B C C D E F G H a Dimensions in inch Min. 0.228 0.150 0.012 0.188 3/4 3/4 0.004 0.016 0.007 0 Nom. 3/4 3/4 3/4 3/4 3/4 0.050 3/4 3/4 3/4 3/4 Dimensions in mm Min. 5.79 3.81 0.30 4.78 3/4 3/4 0.10 0.41 0.18 0 Nom. 3/4 3/4 3/4 3/4 3/4 1.27 3/4 3/4 3/4 3/4 Max. 6.20 3.99 0.51 5.00 1.75 3/4 0.25 1.27 0.25 8 Max. 0.244 0.157 0.020 0.197 0.069 3/4 0.010 0.050 0.010 8 Rev. 1.00 9 March 8, 2010 HT9291/HT9292/HT9294 14-pin SOP (150mil) Outline Dimensions A 1 14 7 8 B C C' G H D E F a * MS-012 Symbol A B C C D E F G H a Symbol A B C C D E F G H a Dimensions in mil Min. 0.228 0.150 0.012 0.337 3/4 3/4 0.004 0.016 0.007 0 Nom. 3/4 3/4 3/4 3/4 3/4 0.050 3/4 3/4 3/4 3/4 Dimensions in mm Min. 5.79 3.81 0.30 8.56 3/4 3/4 0.10 0.41 0.18 0 Nom. 3/4 3/4 3/4 3/4 3/4 1.27 3/4 3/4 3/4 3/4 Max. 6.20 3.99 0.51 8.74 1.75 3/4 0.25 1.27 0.25 8 Max. 0.244 0.157 0.020 0.344 0.069 3/4 0.010 0.050 0.010 8 Rev. 1.00 10 March 8, 2010 HT9291/HT9292/HT9294 Product Tape and Reel Specifications T2 D A B C T1 Reel Dimensions SOP 8N Symbol A B C D T1 T2 SOP 14N Symbol A B C D T1 T2 TSOT23-5 Symbol A B C D T1 T2 Description Reel Outer Diameter Reel Inner Diameter Spindle Hole Diameter Key Slit Width Space Between Flange Reel Thickness Dimensions in mm 178.01.0 60.01.0 13.0 +0.5/-0.2 2.40.1 9.00.5 11.80.5 Description Reel Outer Diameter Reel Inner Diameter Spindle Hole Diameter Key Slit Width Space Between Flange Reel Thickness Dimensions in mm 330.01.0 100.01.5 13.0 16.8 +0.5/-0.2 Description Reel Outer Diameter Reel Inner Diameter Spindle Hole Diameter Key Slit Width Space Between Flange Reel Thickness Dimensions in mm 330.01.0 100.01.5 13.0 12.8 +0.5/-0.2 2.00.5 +0.3/-0.2 18.20.2 2.00.5 +0.3/-0.2 22.20.2 Rev. 1.00 11 March 8, 2010 HT9291/HT9292/HT9294 Carrier Tape Dimensions D E F W C P0 P1 t B0 D1 P A0 K0 R e e l H o le p a c k a g e p in 1 a n d th e r e e l h o le s a r e lo c a te d o n th e s a m e s id e . IC SOP 8N Symbol W P E F D D1 P0 P1 A0 B0 K0 t C SOP 14N Symbol W P E F D D1 P0 P1 A0 B0 K0 t C Cavity Pitch Perforation Position Cavity to Perforation (Width Direction) Perforation Diameter Cavity Hole Diameter Perforation Pitch Cavity to Perforation (Length Direction) Cavity Length Cavity Width Cavity Depth Carrier Tape Thickness Cover Tape Width Description Carrier Tape Width Dimensions in mm 16.0 +0.3/-0.1 Description Carrier Tape Width Cavity Pitch Perforation Position Cavity to Perforation (Width Direction) Perforation Diameter Cavity Hole Diameter Perforation Pitch Cavity to Perforation (Length Direction) Cavity Length Cavity Width Cavity Depth Carrier Tape Thickness Cover Tape Width Dimensions in mm 12.0 +0.3/-0.1 8.00.1 1.750.1 5.50.1 1.550.1 1.50 +0.25/-0.00 4.00.1 2.00.1 6.40.1 5.20.1 2.10.1 0.300.05 9.30.1 8.00.1 1.750.1 7.50.1 1.5 1.50 +0.1/-0.0 +0.25/-0.00 4.00.1 2.00.1 6.50.1 9.50.1 2.10.1 0.300.05 13.30.1 Rev. 1.00 12 March 8, 2010 HT9291/HT9292/HT9294 Carrier Tape Dimensions D E F W C P0 P1 t B0 D1 P A0 K0 R e e l H o le IC M a r k in g TSOT23-5 Symbol W P E F D D1 P0 P1 A0 B0 K0 t C Description Carrier Tape Width Cavity Pitch Perforation Position Cavity to Perforation (Width Direction) Perforation Diameter Cavity Hole Diameter Perforation Pitch Cavity to Perforation (Length Direction) Cavity Length Cavity Width Cavity Depth Carrier Tape Thickness Cover Tape Width Dimensions in mm 8.00.2 4.00.1 1.750.10 3.500.05 1.5 1.1 +0.1/-0.0 +0.1/-0.0 4.00.1 2.000.05 3.20.1 3.20.1 1.10.1 0.250.05 5.30.1 Rev. 1.00 13 March 8, 2010 HT9291/HT9292/HT9294 Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shenzhen Sales Office) 5F, Unit A, Productivity Building, No.5 Gaoxin M 2nd Road, Nanshan District, Shenzhen, China 518057 Tel: 86-755-8616-9908, 86-755-8616-9308 Fax: 86-755-8616-9722 Holtek Semiconductor (USA), Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538 Tel: 1-510-252-9880 Fax: 1-510-252-9885 http://www.holtek.com Copyright O 2010 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holteks products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.00 14 March 8, 2010 |
Price & Availability of HT9291 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |